6 Maintenance
This chapter describes all of the switch Maintenance configuration tasks to enhance the performance of local network
including Restart Device, Firmware upgrade, Save/Restore, Import/Export, and Diagnostics.
6.1 Restart Device
This section describes how to restart switch for any maintenance needs. Any configuration files or scripts that you saved
in the switch should still be available afterwards.
Web Interface
To restart the device:
1. Click Restart Device.
2. Click Yes.
Figure 6-1.1: Restart Device
Parameter description:
Restart Device:
You can restart the switch on this page. After restart, the switch will boot normally.
Buttons:
Yes – Click to restart the device.
No- Click to undo any restart action.
6.2 Firmware
This section describes how to upgrade the Firmware. The Switch can be enhanced with more value-added functions by
installing firmware upgrades.
6.2.1 Firmware Upgrade
This page facilitates an update of the firmware of the switch.
Web Interface
196
LANCOM GS-2310P/GS-2326(P) User Manual
6 Maintenance
To Next Page
Loading...
