Lancom GS-2310P - Privilege Level

4.3.2 Privilege Level
This page provides an overview of the privilege levels. The switch provides user set privilege levels from 1 to 15 for
Account, Aggregation, Diagnostics, EEE, GARP, GVRP, IP, ICMP Snooping, LACP, LLDP, LLDP, MED, MAC Table, MRP,
MVR, MVRP, Maintenance Mirroring, POE Ports, Private VLANs, QoS, SMTP, SNMP, Security, Spanning Tree, System Trap
Event, VCL, VLANs, Voice VLAN.
Web Interface
To configure Privilege Level in the web interface:
1. Click SYSTEM, Account, Privilege Level.
2. Specify the Privilege parameter.
3. Click Apply.
Figure 4-3.2: The Privilege Level configuration
Parameter description:
Group Name
145
LANCOM GS-2310P/GS-2326(P) User Manual
4 System Configuration