Landmann 32961 - Page 6

6
Assembly Instructions
1
1
22
2
4
N
AA
CC
AA
CC
Carefully stand cabinet (A) upright. Place a level (not
included) on side of unit, adjust adjustable feet (K) as
needed until cabinet (A) is level.
Attach wheel assemblies (N) to rear side of cabinet (A)
with three spring washers (CC) and three short bolts
(AA) and loosely tighten. Once all short bolts (AA) are
adequately threaded, fully tighten.
1
6
2
F
AA
CC
Secure damper vent with guard (F) to top of cabinet
using sping washer (CC) and short bolt (AA). Tighten
bolts (AA) securely. Note: Do NOT over tighten short
bolt (AA).
1
3
22
K
A
CC
CC
O
2
5
AA
AA
1
1
Secure back handle (O) to rear of cabinet using spring
washers (CC) and short bolts (AA). Tighten bolts (AA)
securely.