Heartland Owners Forum http://manuals.heartlandowners.org
Landmark 365 User Guide V1.1.pdf P a g e | 45 Version 1.1, March 10, 2016
The signal booster amplifies the weak signals from the antenna and must be ON in order to receiver
over-the-air signals. However, when using cable TV, the signal booster must be OFF. It’s important to
set the signal booster correctly before attempting a channel scan on the TV.
Cable TV Set Top Boxes
In most campgrounds, in order to watch Cable TV, you simply connect the campground COAX to the
Cable TV COAX connector in the UDC. Switch the Signal Booster OFF, and do a channel scan on the TV.
But in some campgrounds, the connection may be more complicated.
In 2012, the major cable TV companies received permission from the FCC to discontinue analog TV
service and provide only digital signals. In campgrounds where this change has been implemented by
the cable company, customers must use a Set Top Box to decode the incoming signals. In campgrounds
where a Set Top Box is required, a separate remote control changes channels on the Set Top Box, rather
than changing channels at the TV. The output of the Set Top Box must be connected to the TV’s input,
To Next Page
Loading...