Need help?Do you have a question about the Laney A1+ and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Speaker Size | 8 inch |
| Inputs | XLR, 1/4 inch Jack |
| Type | Combo Amplifier |
| Outputs | DI Out |
| Speaker | Custom Designed |
| Effects | Chorus, Reverb |
| EQ | 3-band EQ |
Details input socket, EQ pre-shape, and peak indicator for sound shaping.
Explains gain and bass controls for adjusting input level and low frequencies.
Covers mid-frequency sweep and treble controls for tonal adjustment.
Details anti-feedback adjustment and phase switching for sound clarity.
Describes mute function, master volume, power status, and auxiliary input.
Covers onboard effects, level, send, and external FX loop management.
Details the main power switch, voltage selection, and power inlet socket.
Explains phantom power, footswitch connection, FX send/return, and ground lift.
Describes FX send/return, FX loop switch, and balanced D.I. output.
Covers line out connection, and the hum loop elimination switch.
Provides tips on amplifier connection, cable usage, and speaker safety.
Details selecting Reverb, Chorus, or Multi FX and setting their levels.
Explains assigning effects to channels and blending internal/external effects.
Guides on using external effects with channel assignments.
Explains blending internal and external effects for diverse sounds.
Illustrates connecting instruments, player, and headphones to the amp.
Shows connections to mixer desks, FX units, and footswitches.
Demonstrates kickback positioning and mounting on a pole stand.
To Next Page
