Need help?Do you have a question about the Laney AH40 and is the answer not in the manual?
Important safety advice regarding electrical hazards and appliance care.
Overview of manual structure and essential first-time setup steps for the amplifier.
Details the MIC and LINE inputs for Channel 1 and its level control.
Describes the stereo line input and level control for Channel 2.
Explains the high impedance input and level control for Channel 3.
Covers the Graphic EQ, Master Volume, AUX IN, LINE OUT, and PHONES connections.
Details all input types (MIC, LINE, INSTRUMENT) and their level controls for channels 1, 2, and 3.
Explains the FX SEND, DELAY (Time, Feedback, Level), and Graphic EQ functions.
Covers Master Volume, AUX IN, LINE OUT, PHONES, and POWER LED indicators.
Details the Voltage Select Switch, Mains Inlet, Fuse, and Power Switch.
Guidance on amplifier connection sequence and safety precautions for high sound levels.
Instructions for checking the product for damage upon arrival.
Guidance on the correct sequence for turning the amplifier and other system components on/off.
Warnings on cable types and advice on product servicing by qualified personnel.
Details FCC compliance, European certifications, and environmental disposal guidelines.
Guidelines on where to use the appliance, cleaning, ventilation, and avoiding heat/liquids.
Information on Class I construction, power cord protection, and grounding pin.
Covers accessory use, rack mounting, servicing, cable wiring, and unplugging precautions.
Warnings about high noise levels and explanations of product safety symbols.
To Next Page
General
