14
3. Insert pump connector into
opening on left side of pump.
2. Secure other end of 600 mm
tubing firmly to the pump
connector.
1. Secure one end of 600 mm
tubing to tubing Y connector.
4.2 Connecting the Breastmilk Expression Set
Once Breastmilk Expression Set is assembled, connect to pump base:
4.3 Connecting for Single Pumping
1. Remove one of the 300 mm
tubing from the tubing Y
connector.
2. Secure plug into open outlet of
tubing Y connector.
To Next Page
Loading...
