EDS1100/2100 Device Server User Guide 22
3: Installation of EDS1100
This chapter describes how to install the EDS1100 device server. It contains the following
sections:
Package Contents
User-Supplied Items
Hardware Components
Installing the EDS1100
Package Contents
The EDS1100 package includes the following items:
One EDS1100 device
One DB25M-to-DB9F serial cable
Power Cube, 100-240 VAC with international adapters
Power cord restraint
Printed Quick Start Guide
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial device that requires network connectivity.
A serial cable, as in the following list, for your serial device. One end of the cable must have a
male DB25 connector for the serial port.
- A null modem cable to connect the serial port to a DCE device.
- A straight-through modem cable, such as the one supplied in the package, to connect the
serial port to a DTE device.
An available connection to your Ethernet network and an Ethernet cable.
A working power outlet if the unit will be powered from an AC outlet.
To Next Page
Loading...
