Lantronix EDS4100 Reference Manual

3: Summary of CLI Commands
EDS Device Servers Command Reference 30
Filesystem Menu
Command
Description
tftp put ascii
<source file>
<destination file>
<host> <port>
Sends an ASCII file using TFTP.
<source file> = name of the file to be to a remote location.
<destination file> = name of the file when it is moved.
<host> = name of the host where the file will be moved.
<port> = port on which the TFTP server is listening (when
not using the default).
tftp put binary
<source file>
<destination file>
<host>
Sends a binary file using TFTP.
<source file> = name of the file to be to a remote location.
<destination file> = name of the file when it is moved.
<host> = name of the host where the file will be moved.
tftp put binary
<source file>
<destination file>
<host> <port>
Sends a binary file using TFTP.
<source file> = name of the file to be sent to a remote
location.
<destination file> = name of the file when it is moved.
<host> = name of the host where the file will be moved.
<port> = port on which the TFTP server is listening (when
not using the default).
touch <string>
Creates a file on the filesystem.
<string> name of the file to be created.

Lantronix EDS4100 Specifications

General

Ethernet Ports	4
Network Ports	4
Console Port	1
Storage Temperature	-40°C to 85°C
Humidity	5% to 95% non-condensing
Memory	32MB SDRAM, 8MB Flash
Operating Temperature	0°C to 50°C
Power Supply	External