Lantronix EDS4100

3: Summary of CLI Commands
EDS Device Servers Command Reference 24
Configure Menu
Command
Description
syslog host <ip
address>
Sets the address of the syslog recipient.
syslog level <severity>
Sets the minimum severity of events that will be logged.
write
Stores and applies the current configuration into
permanent memory.
Interface 1 Level Menu
The following configurable parameters reside in the Interface (IF 1) configuration menu
Interface 1 Level
Command
Description
arp timeout <seconds>
Sets the ARP cache timeout.
<seconds> = ARP cache timeout value.
bootp
Enables BOOTP.
clear host <string>
Removes an entry from DNS cache.
<string> = entry to be removed.
clrscrn
Clears the screen.
dhcp
Enables DHCP.
dhcp renew
Forces DHCP to renew.
duplex auto
Sets Ethernet link duplex to auto-negotiate.
duplex full
Sets Ethernet link duplex to full-duplex.
duplex half
Sets Ethernet link duplex to half-duplex.
exit
Exits the Interface menu and returns to the Enable menu.
ip address <ip
address/bits>
Sets the IP address and netmask.
<ip address/bits> = IP address / netmask in Classless
Inter-Domain Routing (CIDR) notation.
ip address <ip address>
Sets the IP address.
<ip address> = IP address.
ip address <ip address>
<netmask>
Sets the IP address and netmask.
<ip address> = IP address.
<netmask> = netmask in dotted notation.