Lantronix EDS4100 Reference Manual

3: Summary of CLI Commands
EDS Device Servers Command Reference 23
Configure Menu
Command
Description
show ssh
Displays the IP SSH configuration.
show syslog Displays syslog information.
show tcp Displays TCP configuration information and statistics.
show telnet
Displays the Telnet configuration.
show tftp
Displays the TFTP settings and statistics.
show udp
Displays the UDP settings and statistics.
snmp-server community
<string> ro
Sets the read-only community within the SNMP server.
<string> = name of the read-only community that is to be
set.
snmp-server community
<string> rw
Sets the read-write community within the SNMP server.
<string> = name of the read-write community that is to be
set.
snmp-server contact
<string>
Sets the SNMP system contact information.
<string> = system contact information.
snmp-server description
<string>
Enter a description for SNMP server.
<string> = description of server.
snmp-server enable
Enables the SNMP server.
snmp-server enable
traps
Enables traps on the SNMP server.
snmp-server host <ip
address>
Sets the primary SNMP trap host.
<ip address> = IP address of host running the SNMP
trap.
snmp-server host <ip
address1> <ip address2>
Sets the primary and secondary SNMP trap hosts.
<ip address1> = IP address of primary host running the
SNMP trap.
<ip address2> = IP address of secondary host running
the SNMP trap.
snmp-server location
<string>
Sets the SNMP system location.
<string> = SNMP system location.
snmp-server name
<string>
Sets the SNMP system name.
<string> = SNMP system name.
syslog enable
Enables syslog logging.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English