LaScoota 99 - RIDING AND BRAKE INSTRUCTIONS; How to Ride the Scooter; Scooter Brake Operation

SCOOTER DISASSEMBLY
Warning! Keep kids at a safe distance to avoid accidental injury during
assembly.
STEP 1: Pull the fixing sleeve up-
ward from the position shown
in Figure A until it reaches the
position shown in Figure B.
STEP 2: Locate the red push button on the left side of the scooter (Figure C). Press
the red push button with one hand, while pulling with the other hand to disengage
the handlebar from the hole in the scooter body (Figure B). This will require some
force, as the handlebar is held securely in place for maximum safety while riding.
10
SEAT ASSEMBLY
Warning! Keep kids at a safe distance to avoid accidental injury during
assembly.
STEP 1: Place seat at the desired height. (Figure A)
STEP 2: Align the screw and screw cover with the hole
in the scooter rod.
(Figure B)
STEP 3: Turn the screw clockwise. (Figure C)
STEP 4: Tighten the screw to ensure safety. (Figure D)
11
A
A
B
C
D
E
C
D
B