Shenzhen Qilin Laser Application Technology Co., Ltd.
Safety clamp interface
The control box provides a specified interface for safety clamp, which can provide
security for operation. Only when the welding torch nozzle and the safety clamp
are connected, one of the essential conditions of laser out will be achieved.
*The table is the definition of the control system interface of the wire feeder
Security lock signal input
The pin must be connected to the
welding platform or to the welding
materials. When welding, the nozzle is in
contact with the metal material during
welding, so the pilot signal will be on
To Next Page
Loading...