What to do if my Laser Set-top box remote control is not responding?
If the remote control for your Laser Set-top box isn't responding, the batteries might be flat. Try replacing them with fresh ones.
Why is there no picture on my Laser Set-top box?
If there is no picture on your Laser Set-top box, ensure the power is connected and the unit is turned on.
What to do if my Laser Set-top box screen shows “No Signal”?
If your Laser Set-top box screen displays “No Signal”, verify the antenna cable connection at the rear of the STB.
What to do if there is no picture but sound is OK on my Laser Set-top box?
If you have sound but no picture on your Laser Set-top box, the video cables may not be connected correctly. Ensure that all video cables are properly connected.
Why is there no sound from my Laser Set-top box?
If you're not getting any sound from your Laser Set-top box, here are a couple of things to check: * First, examine the audio cable connections to ensure they are correctly connected. * Second, make sure that the sound isn't muted. Un-mute the audio if it is.
Why is the picture breaking up on my Laser Set-top box?
If the picture on your Laser Set-top box is breaking up, the signal might be too weak. Check the antenna connection.
Why is my USB device not detected by my Laser Set-top box?
If your Laser Set-top box isn't detecting the USB device, it might not be getting enough power. Check the power source (if your device has one) or try reconnecting the USB device.
What to do if movie playback is out of sync on Laser STB-6000 Set-top boxes?
If movie playback is out of sync on your Laser Set-top box: * Check the file to ensure there isn't an encoding issue. * If the file is too large, re-encode it at a lower resolution and/or data rate.
General| Brand | Laser |
|---|---|
| Model | STB-6000 |
| Category | Set-top boxes |
| Language | English |
Details the functions of the remote control buttons.
Instructions for connecting the STB-6000 to power.
Details the composite AV connection for older TVs.
Details the HDMI connection for HD TVs.
How to set the On-Screen Display language during initial setup.
Performs a full scan of all available TV and Radio channels.
Scans for new channels without deleting previously saved ones.
Allows editing of channel preferences like lock, skip, favourite, move, or delete.
Accesses the on-screen TV guide for scheduled programs.
How to set reminders or record programs using the EPG.
Allows access and management of multimedia content from USB devices.
Accesses Music, Photo, or Movie files stored on a USB device.
Records the current program using the REC button.
Allows pausing and resuming live TV broadcasts.
Addresses issues like no picture, no sound, and remote unresponsiveness.
To Next Page
