Laser STB-6000 User Manual

STB-6000 USER MANUAL
8
CONNECTING TO A TELEVISION
Power
1. Turn the TV off at the main power outlet.
2. Check the Main Power switch on the rear of the STB-6000 and the mains outlet that it is to be
connected too is in the off position.
3. Connect the Antenna cable to the ANT In socket.
4. Choose the best connection method for your Equipment. There are 2 possible connection methods
and the type that you choose may depend on the type of TV that you have.
5. You can also connect the digital 5.1 audio coaxial output to your Amplifier receiver if you have one.
1
2

Laser STB-6000 Specifications

General

Brand	Laser
Model	STB-6000
Category	Set-top boxes
Language	English