4
PASSIVE ENGINE IMMOBILISATION
Engine will automatically immobilise 30 seconds after switching OFF the ignition key or
30 seconds after the alarm has been disarmed by the remote control, if the ignition has
not been switched ON. Passive immobilisation is signalled by three acoustic tones (Not
excludable).
When this function is active, switching ON the ignition key will cause the system to generate
brief and repeated acoustic tones, whilst flashing the LED. When this function is active, it is
not possible to start the engine. To cancel the passive engine immobilisation, turn the ignition
key ON and press any button on the remote control Once within 10 seconds or enter your secret
remote code. If the passive engine immobilisation is not cancelled within 10 seconds of
switching ON the ignition key, the alarm will automatically arm itself and instantly sound an
alarm condition. If this occurs, press button A or enter your secret remote code to cancel the
alarm condition (with or without ignition key ON).
PANIC FUNCTION
Pressing button B for more than 1second will activate the siren and the indicator light
flashes for 15 seconds. To stop the panic feature prior to the 15 seconds, press any one of
the 3 buttons again on the remote control. This function is not available if the ignition is
switched on.
HAZARD FUNCTION
Pressing button C with the alarm disarmed and with the ignition key OFF, activates the
indicator lights to flash. To stop the indicator lights flashing press button C or put the
ignition key ON, otherwise the function is automatically limited to 4 minutes.
To Next Page
Loading...
