13
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards
or interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
Safety instructions
Dealing with electromagnetic radiation
– Attention: Do not look into the direct or reected beam.
– Do not point the laser beam towards persons.
– If a person‘s eyes are exposed to class 2 laser radiation,
they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not
permitted.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars)
6 times brighter than a typical 630 - 660 nm laser
Laser modules in DLD design stand for high line
quality as well as a clean and clear and therefore
easily visible line image. Unlike previous generations
they are more temperature-stable and energy
efcient.
Furthermore, the human eye has a higher sensitivity
to the wave range of the green laser than the red
laser, for example. This makes the green laser diode
appear much brighter than the red one.
Green lasers, especially in the DLD design, thus offer
advantages with regards to how visible the laser line
is under unfavourable conditions.
Green laser technology
EN
To Next Page
Loading...
Need help?
General
