"No Language Data
Display in English Please
download language data
first"
The file that contains the
Language data is missing.
1. Set the language back to English.
2.
Upload the missing language file to
the machine.
3. Set the language mode to the
desired language again.
"Storage total file size out
of 4M bytes. Please
remove some file"
The file being stored
exceeds the 4M size limit.
1. Reduce the size of file to be stored
to below 4M.
2. Save the file again.
"No Flash Memory. Please
check the device on
machine."
The flash memory is not
detected.
1. Make sure that the flash memory is
installed properly.
2. Save file again.
"X motor malfunction. For
service please inform your
local distributor"
X-motor failed or its
related components failed.
1. Turn off the machine.
2. Move the lens carriage from left to
right by hand freely to make sure
the rail is not blocked.
3. Check for loosed connections and
bad wirings.
4. Change the X-motor PCB to see if
the error is with the PCB.
5. Replace the X-motor and check to
see if fixed.
6. If error remains after the X-motor
change, replace the main board as
well.
"Y motor malfunction. For
service please inform your
local distributor"
X-motor failed or its
related
1. Turn off the machine.
2. Move the lens carriage from back
and forth by hand freely to make
sure the rail is not blocked.
3. Check for loosed connections and
bad wirings.
4. Change the Y-motor PCB to see if
the error is with the PCB.
5. Replace the Y-motor and check to
see if fixed.
6. If error remains after the Y-motor
change, replace the main board as
well.
"Z motor malfunction. For
service please inform your
local distributor"
Z-motor failed or its
related components failed.
1. Check that the connections of the
wiring are not loosed or damaged.
2. Replace the Z-motor.
85
To Next Page
