Lasertec CX2G - Using Your Laser; Power Supply and Battery Replacement; Setting Up the Laser

8
SET UP
• Select a place as close as practical to the
work site. Ensure the location is clear of
traffic.
• Place the instrument on a level surface such
as a bench or mount.
• To mount the instrument onto the supplied
magnetic mount, follow the instructions on
page 11.
POWER SUPPLY
• The instrument is powered by two AA
alkaline batteries.
Battery Replacement
• Remove the battery cover door and the
batteries.
• Insert the batteries according to polarity and
replace the battery cover door.
USING YOUR LASER