9
Powering off
• To turn the instrument off, slide the locking
switch to the “locked” position.
• Press the power button for 1 second.
Always slide the locking switch to the
“locked” position when transporting the
instrument or moving around the job site.
!
OPERATION
Powering on (self levelling)
• To turn the instrument on, slide the locking
switch to the “unlocked” position. Self
levelling will commence and all beams will
activate.
• If the instrument is outside the self
levelling range the instrument will not level
causing the laser beam to flash on and off
repeatedly. If this occurs, reposition the
instrument onto a level surface until the
instrument can level off.
USING YOUR LASER (continued)
To Next Page
Loading...
Need help?
General
