Laskomex EC-2502 - User Manual

DIGITAL ENTRY PHONE SYSTEM
INSTALLATION, SERVICE
AND PROGRAMMING MANUAL
OF ELECTRONIC CASSETTE
EC-2502
All manuals and user guides at all-guides.com
all-guides.com

Summary

SAFETY AND USAGE CONDITIONS

INSTALLATION OF ELECTRONIC CASSETTE AND POWER SUPPLY ADAPTOR

CONFIGURATION

ADJUSTMENT

Adjustment Elements (P1, P2, P3)

Lists volume control for loudspeaker, uniphone, and line balance.

Additional Potentiometers (P4, P1)

Details potentiometers for external panel and uniphone microphone amplification.

PROGRAMMING OF ENTRY PHONE

Entering Programming Mode

Steps to enter the programming mode using key and code.

P-1 Operation Parameters

Lists and explains parameters for entry phone operation.

P-2 Functions Realized by Entry Phone

Details functions controllable by the entry phone system.

P-3 Installation Procedure

P-3 Installation Procedures Overview

Details procedures P-3-0 through P-3-9 for installation and configuration.

P-4 Electronic Keys

P-4 Electronic Key Management

Covers adding, deleting, and identifying electronic keys.

P-5 Individual Setting

P-5 Individual Settings Parameters

Configuration for calling tone, volume, bells, options, entrance, and lock.

P-6 to P-9 Procedures

RESTORE INITIAL SETTINGS

Global Default Parameter Reset

Resets all default parameters of the electronic cassette.

Selective Default Settings Restore

Allows selective restoration of default settings for specific parameters.

Selective Restore Procedures

Details procedures P-3-7, P-3-8, P-3-9 for selective parameter restoration.

CONFORMITY WITH PREVIOUS VERSIONS

Compatible EC-2502 Versions

Lists compatible EC-2502 versions and their compatibility with external panels.

CD-3100 System Cooperation

Describes cooperation with CD-3100 system.

FAULTS MESSAGES

Fault Code Descriptions

Explains fault codes EC, E2, E0, and EEr for troubleshooting.

TECHNICAL DATA

Technical Data Summary

Covers power supply, wire descriptions, protection degree, and ambient temperature.

DESCRIPTION OF TERMINALS

Power, Voltage, and Ground Terminals

AC power, voltage output, ground, and electro-catch ground terminals.

Electro-catch, Switching, and Key Terminals

Electro-catch supply, key switching output/ground, and unpowered terminals.

Communication, Signal, and Control Terminals

Terminals for external panel, uniphone, door opening, video source, and accumulator.

DIMENSIONS OF ELEMENTS

SELECTION OF WIRES AND CONNECTION DIAGRAMS

Main Entrance Wiring Diagram

Details the wiring and connections for the main entrance system.

Subordinate Entrance Wiring Diagram

Details the wiring and connections for subordinate entrances.

Video Wiring Diagram (Part 1)

Note on CP-250 xxR Terminal K3

Advises on increasing wires connected to terminal K3 in CP-250xxR panels.

Note on CP-250 xxR GX Clamp

Instructs to leave the GX clamp unconnected in CP-250xxR panels.

Video Wiring Diagram (Part 2)

Note on CP-250 xxR Terminal K3

Advises on increasing wires connected to terminal K3 in CP-250xxR panels.

Note on CP-250 xxR GX Clamp

Instructs to leave the GX clamp unconnected in CP-250xxR panels.

INSTRUCTION ON ENVIRONMENT PROTECTION

Environmental Protection and Recycling

Information on product marking, disposal, collection, and recycling.

Laskomex EC-2502 Specifications