Axis RF Meter Quick Start Guide
This meter has many capabilities, including
memory, alarm, date/time, average etc.
which will require some study of the manual
to use properly. However, you can quickly
and easily begin making measurements
right out of the box. Just follow these simple
steps:
1. Insert 9V battery.
2. Turn meter on with GREEN button.
3. Press XYZ/MEM button until all three
(XYZ) letters are displayed on the screen
(to the left of the main number).
4. Press UNIT/ENTER button until the
desired units are displayed below the
main number (we recommend using
mV/m… and we recommend a maximum
level of 614 mV/m for prolonged
exposure).
You are now ready to make your first
measurements!
To Next Page
Loading...
Need help?
General
