1 Introduction
This meter is designed for measuring and
monitoring Radio–Frequency electromagnetic
field strength. The meter is calibrated precisely
over the frequency range of 10MHz~8GHZ.
2 Method of Operation
Press “Power” button on. To change
measuring unit (mV/m), push “UNIT” button
to change the unit. Electric field strength
V/m).Computed magnetic field strength
(mA/m).Computed power density
(mW/m
2
).Computed power density
(μW/cm
2
). Press "XYZ” this button
to change sensor axis selector:
“All axis ” → “X axis” → “Y axis”
→ “Z axis”.
To Next Page
Loading...
