Need help?Do you have a question about the LATNEX HF-B8G and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Sampling Time | 0.5 seconds |
| Power Supply | Rechargeable battery |
| Battery Life | 8 hours |
| Operating Temperature | 0°C to 50°C |
| Units | V/m, mW/cm² |
| Data Logging | Yes |
| Weight | 200g |
| Measurement Type | Electromagnetic Field (EMF) Meter |
Details EMC compliance, ambient conditions, sensor type, frequency range, dynamic range, and absolute error.
Covers battery loading and replacement procedures, including low battery indicators.
Provides instructions for turning the RF meter ON and OFF using the power button.
Explains how to use the data hold function to freeze and read measurements.
Details how to cycle through and select different measurement units using the UNITS key.
Describes how to switch between MAX, AVG, and MAX/AVG readings and their storage limits.
Instructions for manually saving measurements, with a storage capacity of 200 data sets.
How to input and adjust the calibration factor (CAL) to improve measurement accuracy.
To Next Page
