Lattice Semiconductor CrossLink-NX - Jumpers and Test Connection

CrossLink-NX Object Counting Using VGG Quick Start Guide
Application Note
© 2020 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
12 FPGA-AN-02024-1.0
3. Generating the Binary File
For the detailed procedure in creating the binary file, refer to the Creating Binary File with sensAI section in CrossLink-
NX Object Counting Using VGG CNN Accelerator IP (FPGA-RD-02200).
4. Programming the Bitstream and Binary files to VIP Board and
SD Card
For the detailed procedure in flashing the bitstream file to the VIP board and flashing the binary file to the SD card,
refer to CrossLink-NX Object Counting Using VGG CNN Accelerator IP (FPGA-RD-02200).