ECP5 Face Identification Quick Start Guide
Application Note
© 2019 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
10 FPGA-AN-02010-1.0
Figure 2.7. Training Status Example
Figure 2.8. Machine Training Output File
Create the inference network model proto file.
The inference network mode is different from the training proto file. The inference model does not use Drop5 and
FC6 layer.
Remove train_data, test_data, drop5, loss, accuracy, fc6, and center_loss.
Lattice provides the reference proto file of Inference model file faceid_demo.proto.
The inference proto file is used in the part of generating binary file.
Refer to the Preparing the Dataset section in ECP5-Face-Identification-Reference-Design (FPGA-RD-02062).
To Next Page
Loading...
