Lattice Semiconductor MachXO2

To Next Page

To Previous Page

MachXO2 Dual Sensor

Interface Board

QS014

January 2012

latticesemi.com

L (stylized) Lattice Semiconductor Corp., Lattice (design), Lattice Diamond,

LatticeECP3 and MachXO2 are either registered trademarks or trademarks

of Lattice Semiconductor Corporation in the United States and/or other coun-

tries. Other product names used in this publication are for identication pur-

poses only and may be trademarks of their respective companies.

Technical Support

1-800-LATTICE (528-8423)

+1-503-268-8001

techsupport@latticesemi.com

Possible Next Steps

A36-pinTexasInstruments(TI)IPnetworkcameraconnectorcanalsobeused.Thiscon-

nector allows the DSIB to interface to a TI ISP base board. This requires a ﬂat cable connec-

tionandaTIIPnetworkcameraboard.WhentheDSIBisusedwiththeTIISPbaseboard,the

DSIB is not plugged into the HDR-60 Base Board. For further information, see EB69, MachXO2

Dual Sensor Interface Board User’s Guide.FordetailsontheTIIPnetworkcamera,visitwww.

ti.com/ipcamera.

Lattice Semiconductor MachXO2 - Page 4