Lauda IN 1850 XTW User Manual

Integral Process Thermostats and High-Temperature Thermostats
Operation manual
IN 130 T, IN 230 T, IN 230 TW, IN 530 T, IN 530 TW, IN 1030 T, IN 1330 TW, IN 1830 TW, IN 150 XT,
IN 250 XTW, IN 280 XT, IN 280 XTW, IN 550 XT, IN 550 XTW, IN 590 XTW, IN 750 XT, IN 950 XTW, IN 1590 XTW,
IN 1850 XTW, IN 2560 XTW, IN 2050 PW, IN 2560 PW, IN 4 XTW, IN 8 XTW
V6R9
Read this manual prior to performing any task!

Lauda IN 1850 XTW Specifications

General

Heater power	3.5 kW
Cooling power at 20°C	1.8 kW
Cooling Capacity	1.8 kW at 20°C
Heating Capacity	3.5 kW
Power Supply	400 V
Interface	RS232

Summary

1 Safety

1.1 Safety information

Crucial safety guidelines and warnings for device operation.

2 Unpacking

3 Device description

4 Before starting up

4.4 LAUDA heat transfer liquids

Information on permissible heat transfer liquids and their properties.

5 Commissioning

5.2 Switching on the device for the first time

Initial steps for powering on the device and basic configuration.

5.5 Fill the device with heat transfer liquid

Instructions and warnings for filling the device with heat transfer liquid.

6 Operation

8 Operating a device with pressure overlay

8.1 Warnings, safety instructions and further information

Key safety warnings and general information for pressure overlay devices.

9 Maintenance

9.1 Warning notes for maintenance

Critical safety warnings before performing any maintenance on the device.

10 Faults

10.1 Alarms, errors and warnings

How alarms, errors, and warnings are displayed and handled on the device.

10.3 Troubleshooting

Guide to diagnosing and resolving common device faults and issues.

12 Disposal

15 Technical data