EasyManua.ls Logo

Lauda IN 530 TW - User Manual

Default Icon
200 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Integral Process Thermostats and High-Temperature Thermostats
Operation manual
IN 130 T, IN 230 T, IN 230 TW, IN 530 T, IN 530 TW, IN 1030 T, IN 1330 TW, IN 1830 TW, IN 150 XT,
IN 250 XTW, IN 280 XT, IN 280 XTW, IN 550 XT, IN 550 XTW, IN 590 XTW, IN 750 XT, IN 950 XTW, IN 1590 XTW,
IN 1850 XTW, IN 2560 XTW, IN 2050 PW, IN 2560 PW, IN 4 XTW, IN 8 XTW
V6R9
Read this manual prior to performing any task!

Table of Contents

Questions and Answers

  • S
    Sara MichaelSep 9, 2025
    Why is degassing functioning poorly on my Lauda Thermostat?
    • R
      Ryan BrownSep 9, 2025
      Degassing on your Lauda Thermostat might function poorly if pressure control is active, so switch it off. A pump level that is too high can also cause this, so select a lower pump level. Reduce the heating output, as it may be too high. If the cooling unit is active, switch it off. If the heat transfer liquid is heavily contaminated, change it. Ensure the filler nozzle is not closed by removing the tank lid and placing it loosely on the filler nozzle. If applicable, connect the inert gas blanket, with compressed air for pure degassing if necessary.
  • B
    barbarawalkerSep 12, 2025
    What does 'Pump blocked' mean on Lauda Thermostat display?
    • B
      bradleyclarkSep 12, 2025
      The 'Pump blocked' message on your Lauda Thermostat display indicates a pump motor monitoring issue, such as overload or blockage. The viscosity of the heat transfer liquid may be too high; consider changing to another heat transfer liquid or increasing the set temperature.
  • Z
    Zachary BrownSep 14, 2025
    What does 'Evaporator frozen' mean on Lauda Thermostat display?
    • T
      thernandezSep 14, 2025
      The 'Evaporator frozen' message on your Lauda Thermostat display indicates that the evaporator is frozen. Increase the pump level. Open the manual bypass in the constant temperature equipment. Increase the flow rate through the application.
  • C
    Christopher ParrishSep 16, 2025
    What does 'Low level (pump)' mean on Lauda Thermostat display?
    • T
      Theresa CaseySep 16, 2025
      The 'Low level (pump)' message on your Lauda Thermostat display indicates that the pump motor is idling. Check whether the float in the expansion vessel is blocked by a foreign object.

Summary

Safety

Safety information

Important safety instructions for initial device usage and handling.

Personal protective equipment

Specifies required protective gear like gloves, clothing, and glasses for safe operation.

Unpacking

Before starting up

Install device

LAUDA heat transfer liquids

Guidance on selecting and using appropriate heat transfer liquids.

Commissioning

Switching on the device for the first time

Step-by-step guide for initial power-up and basic setup.

Fill the device with heat transfer liquid

Operation

General warning

General safety precautions and warnings for device operation.

Setting Tmax

Operating a device with pressure overlay

Warnings, safety instructions and further information

Crucial safety guidelines for pressure overlay operation.

Filling and operating a device with pressure overlay

Maintenance

Maintenance intervals

Checking the overtemperature protection

Faults

Troubleshooting

Guide to identifying and resolving common device faults.

Decommissioning

General

Contact LAUDA

Lauda IN 530 TW Specifications

General IconGeneral
BrandLauda
ModelIN 530 TW
CategoryThermostat
LanguageEnglish

Related product manuals