Lauda IN 950 XTW User Manual

Integral Process Thermostats and High-Temperature Thermostats
Operation manual
IN 130 T, IN 230 T, IN 230 TW, IN 530 T, IN 530 TW, IN 1030 T, IN 1330 TW, IN 1830 TW, IN 150 XT,
IN 250 XTW, IN 280 XT, IN 280 XTW, IN 550 XT, IN 550 XTW, IN 590 XTW, IN 750 XT, IN 950 XTW, IN 1590 XTW,
IN 1850 XTW, IN 2560 XTW, IN 2050 PW, IN 2560 PW, IN 4 XTW, IN 8 XTW
V6R9
Read this manual prior to performing any task!

Lauda IN 950 XTW Specifications

General

Brand	Lauda
Model	IN 950 XTW
Category	Thermostat
Language	English

Summary

Safety

Safety information

Provides essential safety guidelines and warnings for device operation.

Obligations of the operator

Details the responsibilities of the user regarding operational safety and regulations.

Personal protective equipment

Outlines necessary personal protective equipment such as gloves, clothing, and glasses.

Safety fittings on the device

Describes safety features like overtemperature and low-level protection.

Unpacking

Before starting up

Install device

Provides warnings and guidelines for correctly installing the device.

Connecting an external application

Details how to connect external applications and associated warnings.

LAUDA heat transfer liquids

Lists permissible heat transfer liquids and their properties.

Cooling water requirements

Outlines specific purity requirements for cooling water.

Configuring interfaces

Explains how to configure various device interfaces for communication.

Configuring the Ethernet interface

Guides through configuring the Ethernet interface for network communication.

Error messages

Provides a list of Ethernet interface error messages and their descriptions.

Commissioning

Establishing a mains connection

Details safety precautions and steps for connecting the device to the mains.

Switching on the device for the first time

Explains the initial start-up sequence and required entries.

Setting heat transfer liquid

Details how to select and configure the heat transfer liquid used in the device.

Fill the device with heat transfer liquid

Provides crucial warnings and instructions for filling the device with heat transfer liquid.

Degas heat transfer liquid (low boiling point expulsion)

Explains the process of degassing heat transfer liquid to remove low boilers.

Control parameters

Introduces control parameters and their adjustment for optimal performance.

Operation

General warning

Highlights critical safety warnings related to heat transfer liquid and device operation.

Setting Tmax

Details how to set the maximum temperature limits (Tmax) for safety.

Self adaptation

Explains the self-adaptation function for automatic control parameter tuning.

Calibrating the temperature probe

Provides instructions for calibrating the temperature probe using offset or 2-point methods.

Programmer

Web server LAUDA Command

Safe Mode safety fittings

Describes the Safe Mode function for emergency operation and fault handling.

Operation of a high-temperature thermostat

Operating a device with pressure overlay

Warnings, safety instructions and further information

Lists specific warnings and safety instructions for pressure overlay devices.

Setting the parameters for a pressure-stable application up to the maximum system pressure

Setting the parameters for a pressure-stable application

Filling and operating a device with pressure overlay

Covers compressed air supply, filling, and operating procedures for pressure overlay.

Maintenance

Warning notes for maintenance

Highlights critical safety warnings and requirements before performing maintenance.

Maintenance intervals

Checking the overtemperature protection

Checking the low-level protection

Check the heat transfer liquid

Faults

Alarms, errors and warnings

Explains how alarms, errors, and warnings are displayed and their impact.

Alarms

Troubleshooting

Provides a guide to diagnosing and resolving common device faults.

Decommissioning

Drain and clean the device

Disposal

Technical data

Heating output and power supply

Cooling output