What to do if my Laufen toilet does not function?
If your Laufen toilet isn't working, first, check if the main switch located under the appliance on the left is turned on. If it is on, try switching off the main switch, waiting about a minute, and then switching it back on. If the issue persists, have a qualified electrician check the power supply.
Why is the water jet weak in my Laufen toilet?
If the water jet in your Laufen toilet is weak or no water emerges, it could be due to several reasons. First, the intensity setting of the shower jet might be too low; increase it using the Laufen app or by turning the controller forwards during the shower. Save the setting in your basic profile using the app. Alternatively, the nozzle might be covered in limescale or locked, in which case you should initiate a descaling cycle on the shower toilet and wait at least ten minutes. Another cause can be rear shower being used too frequently in succession with a high jet intensity.
How to fix a Laufen toilet controller that is not working?
If the controller on your Laufen toilet isn't working, the water temperature might be low. Try pressing “General settings” in the app and setting economy mode to ECO or ON. Also, you can try switching off the main switch under the appliance, wait approximately 1 minute then switch it on again.
To Next Page
General
