What to do if Laufen CLEANET RIVA Toilets remote control does not work because batteries were inserted incorrectly?
If your Laufen Toilets remote control isn't working because the batteries were inserted incorrectly, check the batteries in the remote control to make sure they are inserted the right way round. Remain in the immediate vicinity of the shower toilet.
What to do if Laufen CLEANET RIVA does not function?
If your Laufen Toilets isn't functioning, the main switch might be off. Turn on the main switch, which is located under the appliance on the left.
What to do if Laufen CLEANET RIVA Toilets appliance is signalling a fault?
If your Laufen Toilets appliance is signaling a fault, switch off the main switch for 30 seconds.
What to do if Laufen CLEANET RIVA Toilets user detection function does not respond?
If the user detection function on your Laufen Toilets isn't responding, briefly press the reset button located under the appliance on the left and wait five seconds. Make sure not to apply any weight to the shower toilet during this time.
What to do if Laufen CLEANET RIVA Toilets remote control is too far away from the shower toilet?
If the remote control is too far from the Laufen Toilets, move the remote control closer to the shower toilet.
What to do if Laufen CLEANET RIVA Toilets holiday program is activated?
If the holiday program is activated on your Laufen Toilets, briefly press the reset button located under the appliance on the left.
What does it mean if Laufen Toilets indicates that maintenance is due?
If your Laufen Toilets indicates that maintenance is due (replace carbon filter, perform thermal cleaning or descaling, replace batteries in remote control or controller), observe the service information on the remote control and follow the procedure suggested.
What to do if there is no radio contact between Laufen Toilets controller and shower toilet?
If there is no radio contact between your Laufen Toilets controller and the shower toilet, open the WC cover and then press the controller.
What to do if Laufen Toilets remote control does not work because there are no batteries?
If your Laufen Toilets remote control isn't working because there are no batteries, insert the batteries in the remote control and remain in the direct vicinity of the shower toilet.
What to do if Laufen CLEANET RIVA Toilets general problem with the appliance?
If you are experiencing a general problem with your Laufen Toilets, briefly press the reset button located under the appliance on the left.
Describes the proper and permitted applications for the Laufen shower toilet.
Details critical warnings and precautions for safe operation and maintenance of the shower toilet.
Provides further safety advice, including usage of drinking water and product liability.
Explains information symbols, warning symbols, and all symbols on the remote control.
Explains the function and meaning of the LED indicator light on the shower toilet.
Identifies key parts of the Laufen shower toilet, including openings and controls.
Details the rotary button controller, touch screen remote, and wall holder for the shower toilet.
Explains the water hardness test strip and the location of the Laufen carbon filter.
Guides the user through activating and setting up the remote control for the first time.
Explains switching on the toilet and how user detection activates functions.
Details the seat lowering system and the use of the splash guard for function checks.
Instructions for using the demo mode to demonstrate shower toilet functions without sitting on it.
Instructions for selecting the desired display language for the remote control.
Details on measuring and selecting water hardness levels.
Guides on setting economy mode and its implications for energy consumption.
Explains how to configure the LED indicator light's brightness or deactivate it.
Explains how to enable or disable the automatic reminder for thermal cleaning.
Instructions on how to save any modified basic settings using the remote control.
Procedures for extending and retracting the shower arm for cleaning or replacement.
Guides on how to replace the carbon filter using the remote control.
Guides on how to manually start the thermal cleaning program.
Guides on how to manually start the descaling program.
Steps to reset the shower toilet to its original factory default settings.
How to modify jet intensity and shower jet position for rear and lady showers.
Instructions for setting shower duration and water temperature for both showers.
Details on activating massage (pulsation) and oscillation functions.
How to activate or deactivate the air purifier function.
Configuration options specific to the lady shower function.
Instructions on how to save personalized settings to basic or user profiles.
Explains how the air purifier functions and how to activate or deactivate it.
Guide on selecting basic profile or individual user profiles via rotary button or remote.
Instructions for starting and stopping the rear shower using the rotary button or remote.
How to adjust power shower, jet intensity, and position for the rear shower.
Details on activating pulsation and oscillation for the rear shower.
Instructions on how to save modifications made to the rear shower settings.
Procedure for transitioning from the rear shower to the lady shower.
Instructions for starting and stopping the lady shower using the rotary button or remote.
How to adjust jet intensity, position, and pulsation for the lady shower.
Instructions on how to save modifications made to the lady shower settings.
Information on the LED indicator light's behavior and settings.
Covers holiday program setup, cleaning the seat/cover, and cleaning openings.
Instructions for cleaning the ceramic surface, plastic parts, metal components, and remote control.
Lists suitable/unsuitable cleaning agents and how to order consumables.
Guides on automatic thermal cleaning, including messages and process steps.
Instructions on delaying or starting the thermal cleaning cycle.
Information on monitoring thermal cleaning progress and how to stop it.
Instructions for manually initiating and performing thermal cleaning.
Guides on automatic descaling, including signals, preparation, and process steps.
Details on the descaling signal, preparation, and the descaling process.
Instructions for manually initiating and performing descaling.
Instructions for automatic replacement of the carbon filter.
Step-by-step guide for replacing the carbon filter.
Instructions for manually replacing the carbon filter.
Steps for cleaning/replacing the nozzle and replacing the cover ring.
Detailed instructions for replacing the cover ring using a special tool.
Guides for replacing batteries in the remote control, including messages and steps.
Information on controller battery level messages and replacement.
Detailed physical steps for removing and replacing the controller battery.
How to access information and perform a system reset on the shower toilet.
Explains LED indicator lights and remote control messages for troubleshooting.
Information on ceramic unit removal, reserved for technicians.
Lists common operational faults, possible causes, and their solutions.
Lists additional common operational faults, possible causes, and their solutions.
Provides information on the correct disposal of the shower toilet and its components.
Lists the technical data and specifications for the Laufen Cleanet Riva shower toilet.
Outlines the terms of use for the manual, safety compliance, and copyright.
To Next Page
General
