LAUNCH
X-431 PRO V4.0 User Manual
14
F
ig. 4-4
B. Activate the VCI device: In Fig. 4-4, input the Serial Number and Activation
C
ode, which can be found in the password envelope.
F
ig. 4-5
N
ote: To exit and activate it later, tap “Skip”. In this case, you can activate your
connector by tapping “Activate Connector” in “Personal Center”. For details, please
refer to Chapter 9.3 Activate Connector.
C. Download diagnostic software: Tap “Activate”, a dialog box similar to Fig. 4-6
w
ill appear:
Product SN
Activation code
Product SN
To Next Page
Loading...