Launch CRP 349

i
LAUNCH CRP 349 User Manual
EN
Copyright Information
Copyright © 2019 by LAUNCH TECH CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying and recording
or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilies.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its afliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not use
any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark,
service mark, domain name, logo, or company name. You may contact LAUNCH
by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO.,
LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to
use Materials on this manual for purposes or for all other questions relating to
this manual.

Launch CRP 349 Specifications

General

Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Connectivity	Bluetooth
OBD Functions	Read/Clear Codes, Live Data, Freeze Frame, I/M Readiness
Supported Protocols	J1850 VPW, J1850 PWM, ISO9141, ISO14230, ISO15765
Languages	English, French, Spanish, Russian, Japanese, Korean, Portuguese, German, Italian

Summary

Copyright and Trademark Information

Copyright Information

Details copyright ownership and usage restrictions for the manual.

Trademark Information

Defines LAUNCH trademarks and usage guidelines.

Safety Precautions

General Safety Warnings

Essential safety guidelines for operating the diagnostic tool.

1. Introduction

Key Functions Overview

Highlights the main features and advantages of the CRP 349.

2. General Information

OBD II Concepts

Explains the principles of On-Board Diagnostics (OBD) II.

DLC Location

Provides guidance on locating the vehicle's Data Link Connector (DLC).

3. Product Descriptions

CRP 349 Outline

Details the physical components and layout of the CRP 349 device.

Technical Specifications

Lists hardware, operating, and storage specifications of the tool.

4. Initial Use

Charging and System Setup

Instructions for charging the tool and configuring initial system settings.

4.3 Job Menu

Diagnose Module

Covers connection, auto-detect, and manual diagnosis procedures.

OBDII Diagnosis

Details functions for reading, erasing codes, and I/M readiness.

Data Operations

Covers data stream, freeze frame, history, and DTC library access.

Resetting and Updating

Guides on performing maintenance resets and updating software.

System Settings

Explains how to configure units, display, network, and other settings.

9. FAQ

Troubleshooting Common Issues

Addresses issues like system halts, communication errors, and VIN detection failures.

Power and Upgrade Issues

Resolves problems related to tool power and software upgrades.

Warranty and Service Information

Product Warranty Details

Outlines the terms and conditions of the product warranty.

Ordering and Customer Support

Provides information on ordering parts and contacting customer service.