Launch CReader 7001 User Manual

V1.00.001
2017-09-22
Note: This user manual applies to the following CReader models: CReader 6011,
CReader 7001, CReader 7001F, CReader 8001, CReader 8011, CReader 8021 and
CReader 9081. All illustrations and descriptions herein are only for reference. We
reserve the right to make changes due to software update without prior written
notice.

Launch CReader 7001 Specifications

General

Diagnostic Protocols	OBD2, CAN, J1850, ISO9141, ISO14230, ISO15765
Functions	Read/Clear DTCs, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Info
Compatibility	OBDII/EOBD compliant vehicles
Update	Via USB
Operating Temperature	0°C - 50°C (32°F - 122°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)

Summary

Disclaimer and Safety

General Safety Precautions

Essential safety guidelines for operating the diagnostic tool and working on vehicles.

General Information

Diagnostic Trouble Codes (DTCs)

Data Link Connector (DLC) Location

Guidance on locating the Data Link Connector (DLC) on a vehicle for diagnostic tool connection.

Connection and Settings

Connecting the Tool

Step-by-step instructions for connecting the diagnostic tool to a vehicle's DLC.

Configuring Tool Settings

Diagnosing Vehicle Systems

OBDII/EOBD Diagnostics

Perform OBDII/EOBD diagnostics, check DTCs, monitor status, read/erase codes, and view data.

System Diagnosing (ABS/SRS)

Diagnose ABS/SRS systems, read/clear codes, view data, and read vehicle information.

Resetting Vehicle Systems

Perform various resets like Oil, EPB, Steering Angle, Battery, DPF, TPMS, ABS Bleeding, Gear Learning, IMMO, Injector Coding, Throttle Position.

Review and Data Management

Tool Registration and Updates

Update via Memory Card

Instructions for updating the tool via a memory card, including software download and installation.

Update via USB Cable

Instructions for updating the tool using a USB cable connection to a computer.

Frequently Asked Questions (FAQ)

Troubleshooting Common Issues