Launch CReader 8021 User Manual

V1.00.001
2017-09-22
Note: This user manual applies to the following CReader models: CReader 6011,
CReader 7001, CReader 7001F, CReader 8001, CReader 8011, CReader 8021 and
CReader 9081. All illustrations and descriptions herein are only for reference. We
reserve the right to make changes due to software update without prior written
notice.

Launch CReader 8021 Specifications

General

Supported Protocols	OBD2, CAN, J1850, ISO9141, KWP2000
Diagnostic Functions	Read/Clear DTCs, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Info
Operating Temperature	0°C - 50°C (32°F - 122°F)
Storage Temperature	-20°C - 70°C (-4°F - 158°F)
Compatibility	OBDII/EOBD compliant vehicles
Connectivity	USB
Languages	English, Spanish, French, German, Italian, Portuguese, Russian
Update	Via USB

Summary

Safety Precautions and Warnings

Data Link Connector (DLC) Location

OBD II Readiness Monitors

Tool Connection and Settings

Connecting the CReader to a Vehicle

Step-by-step instructions for establishing a connection between the tool and the vehicle's DLC.

Diagnostic and Maintenance Operations

OBDII/EOBD Diagnostics

Guides users through standard OBDII/EOBD tests for fault codes, data streams, and readiness.

System-Specific Diagnostics (ABS/SRS)

Details diagnostic procedures for ABS and SRS systems on supported vehicle models.

Reset and Maintenance Services

Common Reset Functions

Covers essential resets like Oil, EPB, SAS, and Battery Maintenance System.

Advanced Reset Functions

Specialized Maintenance Procedures

Registering and Updating the Tool