EasyManua.ls Logo

Launch Creader Professional 909

Launch Creader Professional 909
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
i
LAUNCH
Professional 909 User Manual
Copyright Information
Copyright © 2019 by LAUNCH TECH CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying and recording
or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilies.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its afliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not use
any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark,
service mark, domain name, logo, or company name. You may contact LAUNCH
by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO.,
LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to
use Materials on this manual for purposes or for all other questions relating to
this manual.
Question and Answer IconNeed help?

Do you have a question about the Launch Creader Professional 909 and is the answer not in the manual?

Launch Creader Professional 909 Specifications

General IconGeneral
ROM8GB
Operating SystemAndroid
ConnectivityWi-Fi, Bluetooth
ProtocolsCAN
Special FunctionsOil Reset, EPB Reset, SAS Reset, TPMS Reset, BMS Reset, DPF Reset, IMMO
ProcessorQuad-core
CompatibilityVehicles compliant with OBDII/EOBD protocols after 1996
LanguagesEnglish, Spanish, French, German, Russian, Portuguese

Summary

Safety Precautions and Warnings

General Information on Vehicle Diagnostics

On-Board Diagnostics (OBD) Overview

Explains On-Board Diagnostics (OBD) I and OBD II systems.

Diagnostic Trouble Codes (DTCs)

Defines Diagnostic Trouble Codes (DTCs), their structure, and meaning.

Device Components and Initial Setup

Device Controls and Specifications

Details the physical controls, ports, and technical specifications of the tool.

Initial Use and Configuration

Guides through initial setup including charging, language, and network configuration.

Core Diagnostic Operations

Connecting and Starting Diagnosis

Instructions for connecting the tool and initiating system diagnosis.

OBD II Specific Functions

Covers OBD II functions: reading/erasing codes, I/M readiness, data stream.

Vehicle Maintenance Reset Functions

Details various reset services for common vehicle maintenance tasks.

Tool Management and Support

Updating and Configuring the Tool

Explains software updates, data management, and system settings.

Troubleshooting and Warranty

Provides answers to frequently asked questions and warranty information.

Related product manuals