Launch Creader Professional CRP129E User Manual (English)

To Next Page

LAUNCH

Professional 129E User Manual

General Notice

• Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. LAUNCH disclaims any and all

rights in those marks.

• There is a possibility that this unit is inapplicable to some of the vehicle

models or systems listed in the diagnosis section due to different countries,

areas, and/or years. Do not hesitate to contact LAUNCH if you come across

such questions. We are to help you solve the problem as soon as possible.

Disclaimer

• To take full advantage of the unit, you should be familiar with the engine.

• All information, illustrations, and specications contained in this manual are

based on the latest information available at the time of publication. The right

is reserved to make change at any time without notice.

• Neither LAUNCH nor its afliates shall be liable to the purchaser of this unit

or third parties for damages, losses, costs or expenses incurred by purchaser

or third parties as a result of: accident, misuse, or abuse of this unit, or

unauthorized modifications, repairs, or alterations to this unit, or failure to

strictly comply with LAUNCH operating and maintenance instructions.

• LAUNCH shall not be liable for any damages or problems arising from the

use of any options or any consumable products other than those designated

as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.

Safety Precautions and Warnings

To pr e v e nt pe rs o n a l i n j ur y or da m a g e to ve hi c le s a n d /o r thi s t o o l , pl ea s e re a d

this user’s manual rst carefully and observe the following safety precautions at

a minimum whenever working on a vehicle:

• Always perform automotive testing in a safe environment.

• Do not attempt to operate or observe the tool while driving a vehicle.

Operating or observing the tool will cause driver distraction and could cause a

fatal accident.

• Wear safety eye protection that meets ANSI standards.

• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or

hot engine parts.

• Operate the vehicle in a well-ventilated work area: Exhaust gases are

poisonous.

• Put blocks in front of the drive wheels and never leave the vehicle unattended

while running tests.

Need help?

Do you have a question about the Launch Creader Professional CRP129E and is the answer not in the manual?

Launch Creader Professional CRP129E Specifications

General

Operating System	Android 7.0
Connectivity	Wi-Fi
Battery	4000mAh rechargeable lithium battery
OBDII Protocols	ISO9141
Update	One-Click Wi-Fi Update
RAM	1GB
ROM	8GB
Operating Voltage	9V - 18V
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Communication	OBDII
Supported Protocols	OBDII, EOBD, CAN
Languages	English, Spanish, French, German, Italian, Russian, Japanese, Korean
Dimensions	228mm x 125mm x 34.5mm
Power Supply	12V DC