Need help?Do you have a question about the Launch CReader V and is the answer not in the manual?
General| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
|---|---|
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Display | 2.8 inch TFT color display |
| Supported Protocols | CAN |
| Diagnostic Functions | Read/Clear DTCs, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Info |
| Voltage Range | 9V to 16V |
| Compatibility | OBDII/EOBD compliant vehicles |
| Screen | Color TFT |
Outlines restrictions on software and material usage.
Details the structure and meaning of diagnostic trouble codes.
Describes the function of readiness monitors in emission testing.
Explains how the system reports completion of diagnostic tests.
Step-by-step instructions for establishing a connection with the vehicle.
Procedures for reading, erasing, and viewing freeze data for DTCs.
Reading and displaying live vehicle data, including entire and custom lists.
Performing advanced diagnostic functions like I/M Readiness, MIL Status, O2 sensor, monitor tests, EVAP, and vehicle info.
To Next Page