Launch CReader V User Manual

LAUNCH CreaderV User’s Manual
5.2 User registration
As you buy a CreaderV, please visit www.crecorder.com to register, only
after successfully registered, you can logon at the site and can download
the CreaderV driver & latest version program of CreaderV.
5.3 Driver download & installation
5.3.1 Driver download
Log on www.crecorder.com，download CreaderV driver, and then unzip it
to local disk.
5.3.2 Install driver
When you connect CreaderV with PC first time, the following window will
appear:
After a while, then the following window will appear:
32

Launch CReader V Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Display	2.8 inch TFT color display
Supported Protocols	CAN
Diagnostic Functions	Read/Clear DTCs, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, Vehicle Info
Voltage Range	9V to 16V
Compatibility	OBDII/EOBD compliant vehicles
Screen	Color TFT