Launch CReader 8001 User Manual

V1.00.001
2017-09-22
Note: This user manual applies to the following CReader models: CReader 6011,
CReader 7001, CReader 7001F, CReader 8001, CReader 8011, CReader 8021 and
CReader 9081. All illustrations and descriptions herein are only for reference. We
reserve the right to make changes due to software update without prior written
notice.

Launch CReader 8001 Specifications

General

Display	4.0" TFT 320*480 DPI
Diagnostic Protocols	OBDII, EOBD
Supported Languages	English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese
Operating Voltage	9 to 18 V
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Compatibility	OBD2 compliant vehicles (1996 and newer)
Functions	Read/Clear DTCs, Live Data, Freeze Frame, I/M Readiness, O2 Sensor Test, On-Board Monitor Test, EVAP System Test, Vehicle Info
Update	Online updates via USB or Wi-Fi

Summary

Safety Precautions and Warnings

2.3 Location of the Data Link Connector (DLC)

2.4 OBD II Readiness Monitors

2.5 OBD II Monitor Readiness Status

4. Connection & Settings

4.1 Connection

Step-by-step guide to connect the tool to a vehicle's DLC.

5. Diagnose

5.1 OBDII/EOBD Diagnosing

1. Read Codes

Function to identify malfunctioning sections of the emission control system.

2. Erase Codes

Function to clear retrieved trouble codes from the vehicle.

3. I/M Readiness

4. Data Stream

5. View Freeze Frame

9. Vehicle Info

5.2 System Diagnosing (Only for CReader 6011/8001/8011/8021)

5.2.1 Read Vehicle Information

5.2.2 Read Fault Code

5.2.3 Clear Fault Code

5.2.4 Read Data Stream

5.3 Resetting (Only applies to CReader 7001/7011F/8001/8011/8021/9081)

5.3.1 Oil Reset Service

Resets the engine oil life system after service or oil changes.

5.3.2 Electronic Parking Brake Reset

Resets the brake pad after replacement or when the indicator lamp is on.

5.3.3 Steering Angle Sensor

Resets the steering angle sensor after component replacement or alignment.

5.3.4 Battery Maintenance System Reset

Resets the vehicle battery monitoring unit and clears fault information.

5.3.5 Diesel Particulate Filter (DPF) Regeneration

5.3.6 Tire Pressure Monitor System Reset

5.3.7 ABS Bleeding

5.3.8 Gear Learning

5.3.9 IMMO Service

5.3.10 Injector Coding

5.3.11 Electronic Throttle Position Reset

5.4 Review

7. Register & Update

Method 1: Via Memory Card (recommended)

Steps to update the tool using a memory card.

Method 2: Via USB Cable

8. FAQ