Launch Creader Professional 123E

i
EN
LAUNCH Professional 123E User Manual
Copyright Information
Copyright © 2019 by LAUNCH TECH CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying and recording
or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilies.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its afliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not use
any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark,
service mark, domain name, logo, or company name. You may contact LAUNCH
by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO.,
LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to
use Materials on this manual for purposes or for all other questions relating to
this manual.

Launch Creader Professional 123E Specifications

General

Brand	Launch
Model	Creader Professional 123E
Category	Diagnostic Equipment
Language	English

Summary

Introduction

General Information

On-Board Diagnostics (OBD) II

Explains the OBD II standard for vehicle emission control monitoring.

Diagnostic Trouble Codes (DTCs)

Details the structure and meaning of five-digit OBD II Diagnostic Trouble Codes.

Location of the Data Link Connector (DLC)

Guides users on locating the standard 16-pin Data Link Connector on vehicles.

OBD II Readiness Monitors

Explains the function of Readiness Monitors in evaluating emissions components.

OBD II Monitor Readiness Status

Describes how OBD II systems indicate the status of monitor testing.

OBD II Definitions

Provides definitions for key OBD II terms like PCM and MIL.

Product Descriptions

Outline of Creader Professional 123 E

Identifies and describes the main physical components of the Creader Professional 123E.

Technical Specifications

Lists hardware details such as screen size, RAM, ROM, voltage, and operating temperatures.

Accessories Checklist

Lists the standard accessories included with the Creader Professional 123E handset.

Initial Use

Charging The Tool

Explains the two methods available for charging the diagnostic tool.

Getting Started

Guides users through initial setup, including language and network configuration.

Job Menu

Describes the main function modules accessible from the Job Menu.

Diagnose

Connection

Details the steps for connecting the diagnostic tool to the vehicle's DLC.

System Diagnosing

Explains how to diagnose electronic control systems of single vehicle models.

OBD II Diagnosis

Outlines the process for performing OBD II specific tests and checks.

History

Allows users to access and resume previous diagnostic sessions.

Update

Data

Diagnostic Report

Stores and allows viewing of all diagnostic reports generated during vehicle diagnosis.

Diagnostic Record

Saves and displays recorded running parameters and waveform graphs from data stream.

DTC Library

Provides definitions for Diagnostic Trouble Codes to aid in problem identification.

DLC(Data Link Connector) Location

Helps users locate the vehicle's Data Link Connector for tool connection.

Feedback

Allows users to submit diagnostic problems for analysis and troubleshooting.

Settings

Units of measurement

Allows setting measurement units to Metric or English System.

Automatic detection on connect

Configures the tool to automatically detect VIN upon vehicle connection.

Display & Brightness

Adjusts standby time and screen brightness for optimal viewing.

Sound

Manages volume and other sound settings for the tool.

Network

Configures wireless LAN settings for online features like updates.

DateTime

Sets the system date and time, important for report sorting.

Language

Selects the preferred language for the tool's interface.

Email Setup

Configures an email address for automatic receipt of diagnostic reports.

Recovery

Resets the tool to its default factory settings.

Clean Up

Clears cache files to free up storage space on the tool.

About

Displays hardware configuration and license agreement details.

FAQ