Launch Creader Professional 909X User Manual

i
LAUNCH Professional 909X User Manual
Copyright Information
Copyright © 2020 by LAUNCH TECH CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying and recording
or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilies.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its afliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not use
any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark,
service mark, domain name, logo, or company name. You may contact LAUNCH
by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO.,
LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to
use Materials on this manual for purposes or for all other questions relating to
this manual.
General Notice
• Other product names used herein are for identification purposes only and
may be trademarks of their respective owners. LAUNCH disclaims any and all
rights in those marks.
• There is a possibility that this unit is inapplicable to some of the vehicle
models or systems listed in the diagnosis section due to different countries,
areas, and/or years. Do not hesitate to contact LAUNCH if you come across
such questions. We are to help you solve the problem as soon as possible.

Launch Creader Professional 909X Specifications

General

Brand	Launch
Model	Creader Professional 909X
Category	Diagnostic Equipment
Language	English

Summary

Copyright and Legal Information

Copyright Information

Details copyright ownership and usage restrictions for the manual.

Trademark Information

Outlines LAUNCH's registered trademarks and usage guidelines.

General Notice

Provides general disclaimers regarding product applicability and potential issues.

Safety Precautions and FCC Compliance

Safety Precautions and Warnings

Essential safety guidelines to prevent injury and tool damage during operation.

FCC Statement

Regulatory information regarding device compliance with FCC rules on radio frequency emissions.

Introduction to Vehicle Diagnostics

Product Introduction

Overview of the Creader Professional 909X diagnostic tool's capabilities.

General Vehicle Diagnostic Information

Background on OBD I and OBD II systems and their evolution.

Understanding OBD II Standards

Diagnostic Trouble Codes (DTCs)

Explains the structure and meaning of OBD II Diagnostic Trouble Codes.

Data Link Connector (DLC) Location

Guides users on finding the vehicle's OBD II diagnostic port.

OBD II Terminology

Defines key terms used in OBD II systems for clarity.

OBD II Monitors Explained

Describes the various diagnostic monitors within the OBD II system.

DTCs and Malfunction Indicator Lamp (MIL)

DTCs and MIL Status

Explains how DTCs are stored and how the Malfunction Indicator Lamp (MIL) is activated.

Tool Hardware and Initial Setup

Components and Controls Overview

Identifies and describes the physical parts and buttons of the diagnostic tool.

Technical Specifications

Lists the hardware specifications and operating parameters of the tool.

Included Accessories

Lists the items included in the product package.

Initial Use and Charging

Guides users through the first-time setup, language selection, and charging process.

Navigating the Job Menu

Diagnose Function

Accesses the main diagnostic features of the tool.

I/M Readiness Function

Checks vehicle readiness for emissions inspections.

OBD II Function

Accesses specific OBD II standard tests.

Reset Function

Performs various maintenance reset procedures.

Update Function

Allows updating the tool's software and APK.

Settings Function

Configures tool preferences and system options.

Performing Vehicle Diagnosis

Connecting the Diagnostic Tool

Step-by-step guide on connecting the tool to the vehicle's DLC.

Smart Diagnosis (Auto-Detect)

Describes the automatic vehicle identification and scanning process.

Manual Diagnosis Steps

Outlines manual vehicle system selection and testing steps.

Reading and Clearing Fault Codes

Explains how to retrieve and clear diagnostic trouble codes.

Data Stream Analysis

Covers viewing live vehicle data in various formats.

OBDII Diagnosis Functions

Provides access to specific OBD II tests and information.

Key OBD II Specific Functions

Reading, Erasing Codes, and I/M Readiness

Covers code management and emissions readiness checks.

Data Stream, Freeze Frame, and Sensor Tests

Details live data, fault snapshots, and sensor testing.

EVAP System and Vehicle Information

Explains EVAP system tests and retrieving vehicle identification data.

Performing Reset and Maintenance Services

Oil, Brake, Steering, and ABS Resets

Guides on resetting service indicators for oil, brakes, steering, and ABS bleeding.

TPMS, Gear Learning, and IMMO Services

Covers tire pressure, gear learning, and immobilizer system services.

Injector Coding and Battery Maintenance

Details injector coding and battery system reset procedures.

DPF Regeneration and Throttle Reset

Explains DPF regeneration and electronic throttle position resets.

Gearbox, Headlamp, Sunroof, and Suspension

Covers gearbox matching, AFS, sunroof, and suspension calibration.

Updating Tool Software

Updating Diagnostic Software and APK

Instructions for downloading and installing software updates.

Managing Diagnostic Data

Diagnostic Reports and Records

Explains how to save, view, and manage diagnostic reports and records.

DTC Library and Feedback

Covers accessing the DTC library and managing feedback logs.

Tool Maintenance and Support

Firmware Fix and FAQ

Provides information on firmware updates and frequently asked questions.

Image Capture and Feedback Options

Details screenshot functionality and various feedback submission methods.

Configuring Tool Settings

Display, Network, and Sound Settings

Covers screen brightness, network connection, and audio preferences.

System, Language, and Email Setup

Guides on setting date/time, language, and email for reports.

Warranty, Ordering, and Customer Service

Product Warranty Information

Details the warranty terms and conditions for the product.

Ordering Parts and Customer Service

Provides information on ordering replacement parts and contacting support.