Launch CReader V User Manual

LAUNCH CreaderV User’s Manual
You can use [ ] [ ] button to select a item and press [ ], the
screen will display as shown below:
4.3.5 EVAP system test
The EVAP test function lets you initiate a leak test for the vehicle’s EVAP
system. The CreaderV does not perform the leak test, but signals to
vehicle’s on-board computer to initiate the test. Before using the system
test function, refer to the vehicle’s service repair manual to determine the
procedures necessary to stop the test.
28

Launch CReader V Specifications

General

Brand	Launch
Model	CReader V
Category	Diagnostic Equipment
Language	English