Launch CRP123X User Manual

i
LAUNCH Professional 123X User Manual
EN
Copyright Information
Copyright © 2019 by LAUNCH TECH CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying and recording
or otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Statement: LAUNCH owns the complete intellectual property rights for the software
used by this product. For any reverse engineering or cracking actions against the
software, LAUNCH will block the use of this product and reserve the right to pursue
their legal liabilies.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its afliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not use
any trademark, service mark, domain name, logo, or company name of LAUNCH
or any third party without permission from the owner of the applicable trademark,
service mark, domain name, logo, or company name. You may contact LAUNCH
by visiting the website at www.cnlaunch.com, or writing to LAUNCH TECH CO.,
LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian,
Longgang, Shenzhen, Guangdong, P.R.China, to request written permission to
use Materials on this manual for purposes or for all other questions relating to
this manual.

Launch CRP123X Specifications

General

Operating System	Android 7.0
Connectivity	Wi-Fi, Bluetooth
ROM	16GB
Processor	Quad-core
Battery	4000 mAh
OBDII Protocols	All 10 modes of OBD II testing
Vehicle Coverage	Covers 57+ vehicle brands
RAM	1GB
Update	Wi-Fi updates
Supported Protocols	KWP2000, CAN

Summary

Safety Precautions and Warnings

1. Introduction

2. General Information

2.1 On-Board Diagnostics (OBD) II

Explains the OBD II system for vehicle emission control monitoring.

2.2 Diagnostic Trouble Codes (DTCs)

Defines and explains OBD II Diagnostic Trouble Codes and their structure.

2.3 Location of the Data Link Connector (DLC)

Guides to finding the vehicle's Data Link Connector (DLC) for diagnostics.

2.4 OBD II Readiness Monitors

Explains the function of OBD II Readiness Monitors for emissions system evaluation.

2.5 OBD II Monitor Readiness Status

Details how to interpret Readiness Monitor status (Ready/Not Ready).

2.6 OBD II Definitions

Provides definitions for key OBD II terms like PCM and MIL.

3. Product Descriptions

3.1 Outline of Creader Professional 123X

Identifies and explains the parts and buttons of the diagnostic tool.

3.2 Technical Specifications

Lists the technical specifications of the device, including screen and dimensions.

3.3 Accessories Checklist

Lists all items included in the product package.

4. Initial Use

4.1 Charging The Tool

Explains the methods for charging the diagnostic tool.

4.2 Getting Started

Guides through the initial setup, language, and network configuration.

4.3 Job Menu

Describes the various function modules available in the Job Menu.

5. Diagnose

5.1 Connection

Provides steps for connecting the diagnostic tool to the vehicle's DLC.

5.2.1 Smart Diagnosis (Auto-Detect)

Explains the automatic vehicle identification and diagnosis process.

5.2.2 Manual Diagnosis

Details how to perform diagnosis manually via menu commands.

5.3 OBDII Diagnosis

Guides through OBD II specific diagnostic functions like reading codes and readiness.

5.4 History

Allows viewing past diagnostic sessions and resuming operations.

6. Update

7. Data

7.1 Diagnostic Report

Stores and manages all generated diagnostic reports.

7.2 Diagnostic Record

Saves and allows playback of recorded data stream parameters.

7.3 DTC Library

Provides definitions and locations for Diagnostic Trouble Codes.

7.4 DLC(Data Link Connector) Location

Helps locate the vehicle's Data Link Connector.

7.5 Feedback

Allows users to submit diagnostic problems and feedback.

8. Settings

8.1 Units of measurement

Configures the measurement units (Metric/English).

8.2 Automatic detection on connect

Enables or disables automatic VIN detection upon connection.

8.3 Display & Brightness

Adjusts screen brightness and standby time.

8.4 Sound

Allows adjustment of volume and sound settings.

8.5 Network

Configures wireless network connections for online features.

8.6 Date/Time

Sets the system's date and time.

8.7 Language

Selects the user interface language.

8.8 Email Setup

Configures email for receiving diagnostic reports.

8.9 Recovery

Resets the tool to its default factory settings.

8.10 Clean Up

Clears cache files to free up storage space.

8.11 About

Displays hardware configuration and license agreement.

9. FAQ

Warranty

Order Information

Details how to order replacement parts and accessories.

Customer Service

Provides contact information for support and inquiries.