12
LAUNCH Professional 123X User Manual
4.3 Job Menu
It mainly includes the following function modules.
Diagnose
To congures the tool to operate as a professional diagnostic
tool.
I/M
A quick access to the I/M Readiness function of OBD II
Diagnosis. I/M refers to Inspection and Maintenance that
is legislated by the Government to meet federal clean-air
standards. I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating
properly and are ready for Inspection and Maintenance testing.
*Note: This function also can be done by performing "OBD II
(Diagnosis)" -> "I/M Readiness". For detailed operation, please refer
to Chapter 5.3.
OBD II
This option presents a quick way to check for DTCs, isolate
the cause of the illuminated Malfunction Indicator Lamp (MIL),
check monitor status prior to emissions certification testing,
verify repairs, and perform a number of other services that are
emission-related.
Battery
Voltage
Measures the current voltage of the vehicle’s battery.
Update
To update vehicle diagnostic software and APK.
*Note: This function requires a stable network connection.
Data
Includes Diagnostic report, Diagnostic record, Feedback and
DTC library etc.
Settings
To make some system settings, including Network setup,
Email and Brightness etc.
To Next Page
Loading...
