Launch CRT5011E

LAUNCH
55
Figure 8-2
4). Write down the Serial Number and Register code for later use.
2. Register the scanner on the update tool .
For beer experience, it is recommended to register and upgrade the tool
rst. But if not, the tool can also be used normally.
1). Launch the update tool, the following screen will appear:
Figure 8-3
2). Select the target language and enter the Serial Number, click
Device
Upgrade, the following screen will appear.
Figure 8-4
3). Enter the required E-mail address and Register Code, click
Submit to nish
the sign-up.