LAUNCH
33
Figure 5-12
Once the sensor is successfully programmed, the following screen will appear.
Figure 5-13
Press the button to return to the previous screen. Press the
OK
button to
continue programming other sensors.
Note:If Auto Create is selected, the TPMS Relearn operation needs to be
performed aer programming all required LAUNCH-sensor.
5.2.2 Manual input
This function allows users to manually enter sensor ID. Users can enter the
random ID or the original sensor ID, if it is available.
Select
MANUAL INPUT
to enter the following screen.
Figure 5-14
To Next Page
Loading...
