24
www.x431.com +86 755 8455 7891
Icon Descriptions
The memory card is ejected or removed from the memory
card slot.
It appears when the tool is connected to the vehicle’s
DLC port via the diagnostic cable.
It appears when the tool is connected to the PC via the
charging cable.
Battery level indicator
4.3 Settings
Select
on the main menu screen and press [OK], the system will enter the
following screen:
Figure 4-2
1) Sensor Pressure Units
Set the air pressure units of the sensors (kPa, PSI or Bar).
2) Sensor Temperature Units
Set the temperature units of the sensors (C° or F°).
3) ID Format
Change the format of the sensor ID display (Auto, Decimal or Hexadecimal).
To Next Page
Loading...
