LAUNCH X431 GDS Sensorbox Manual
14
Fig.3-7
As on Figure 3-7, click [Start] button to perform simulation testing.
Buttons description:
[System]: shows desktop, views current version No, and exits the program.
[Help]: provides the operational guide for current interface.
[Select waveform]: selects the waveform for the sensor at different
operational status.
[Start]: continues the following operation.
[Return]: goes back to the previous interface.
3.2.4 Hand-drawn waveform
It is very convenient for users to simulate special waveform or fault wave with
hand-draw waveform function. Users only can draw the shape of wave form
To Next Page
Loading...